Our modular walk-in cold rooms, fridges, and freezers are available for short- or long-term hire anywhere in the UK. Delivered flat-packed and installed on site by our expert installation team, our versatile cold rooms are available in almost any size and configuration.
Each unit can be set up in fridge or freezer mode, providing reliable temperature control for a wide range of applications. Ideal for both indoor and outdoor use, our walk-in cold rooms can be sited in locations with restricted access or where flexibility is essential, including on scaffolding or raised platforms.
Ideal for events, breakdowns, refurbishments or extra capacity for all types of industries, our cold rooms are regularly maintained and serviced by our own fully-qualified refrigeration engineers, who are also available throughout the duration of your hire.
Cold rooms can be used at any type of event whether sporting, festivals, public or private, as stand-alone units or as part of a package of Jongor equipment.
An ideal solution for refrigeration breakdowns across multiple applications, cold rooms can normally be delivered within 24 hours to support you with emergency requirements.
Our cold rooms are the perfect solution for your event if you require draft keg beer as we can cut out python holes for piping, as required.
Cold rooms are ideal for use as extra seasonal storage or for refrigeration breakdowns in supermarkets, butchers, delis and fishmongers. Can be built inside, plus upstairs if required.
Cold rooms are a great option for extra capacity for both short and long term requirements in food production and manufacturing, whether indoors or outdoors.
Suitable for pharmaceutical, flower stores, and temperature controlled agricultural supplies, our cold rooms are for indoor and outdoor use with a temperature range from ambient to -23°C.
We can design walk-in cold and freezer storage to fit any sizing requirement, within the following size parameters.
Width: 1.8m, 2.4m & 4.8m
Length: unlimited length in increments of 1.2m
Height: 2.1m
Each compressor motor requires 1 x 16-amp supply and this should ideally come from a 16-amp socket within 10m of the cold room location. If you do not have 16-amp sockets, we will supply adaptors to convert from a standard domestic plug to a 16-amp socket. If these adaptors are used, the compressor unit cannot be placed more than 5m away from the plug socket. The number of compressors varies, depending on the size of the cold room. Compressors are included in the cost of each cold room.
There is no minimum hire period for our cold rooms. If you want to extend the hire period, we will work with you to extend the collection date, advising on the availability of the units on hire.
Cold rooms can be installed almost anywhere inside and outside as long as the ground is flat and the area well ventilated. If access is available, we can build inside on any level of a venue as well as on scaffolding and platforms outside.
Our cold rooms are fully waterproof and designed to work outside on flat ground. As they are temporary structures, taping of the seams comes as standard to assist in severe weather conditions. If the cold room is outside and the external air temperature drops below freezing for a sustained period, then the internal temperature may also drop below freezing as the compressor motors cannot heat the air, therefore the contents of the cold room may also freeze.
We will create a delivery and collection schedule for your cold room to suit your requirements. We have national coverage and can deliver 24/7. Please note that freezers need to be switched off 24 hours before collection.
Cold rooms are delivered flat-packed and constructed on site by our own team.
The compressors are capable of refrigeration or freezer mode and can be set from any temperature from ambient to as low as -23°C. It is possible to select and adjust your own temperature.
Pallets will fit through a double gable door and Jackstacks will fit through a standard door - for both you will need to order a ramp.
Depending on availability, we can usually have a walk-in cold room delivered and up and running within 24 hours, and sometimes the same day.
Each unit is checked before every hire and serviced annually. In the unlikely event of a breakdown, ensure to keep the door of the cold room closed to keep the temperature down for as long as possible. Our enginners are available 24/7 to help you with breakdowns. Just call us and we will work with you to resolve the issue as quickly as possible, usually within a couple of hours.
All doors can be opened from the inside so there is no danger of becoming trapped inside.
The final cost of hiring a cold room is dependent on several factors including:
Speak to one of our sales team experts for a quotation tailored to you. For large, complex setups, a site visit will usually be required before a full quote can be given.
Our modular insulated cold rooms are customised to your own size requirements, have a number of door options, with racking and ramps available to hire. Each unit has a compressor fridge motor, tested by our own engineers prior to hire, plus an external temperature panel.
Popular configurations
All cold rooms are 2.1m in height
| Width | Length |
| 1.8m (6ft) | 1.8m (6ft) |
| 2.4m (8ft) | 2.4m (8ft) |
| 2.4m (8ft) | 3.6m (12ft) |
| 2.4m (8ft) | 4.8m (16ft) |
| 2.4m (8ft) | 6.0m (20ft) |
| 2.4m (8ft) | 7.2m (24ft) |
| 2.4m (8ft) | 12.0m (40ft) |
| 4.8m (16ft) | 4.8m (16ft) |
| 4.8m (16ft) | 7.2m (24ft) |
*unlimited length in increments of 1.2m
(Dimensions are external measurements. For internal dimensions, remove 16cm from the external measurements.)
Motor specification
Panel specification
Standard door - compatible with any size and format of cold room and is 800mm wide.
Butcher's door - large leaf single door 1.4m wide and suitable for any cold room application and can be fitted with a PVC strip curtain.
Double/Gable Door - 1.4m wide and can be used on any cold room configuration, offering increased access.
Racking can be hired as an optional extra for storage. For standard kitchen operations we recommend hiring the number of sets of racking to coincide with the unit’s length in metres, for example a 2.4m length cold room would require 2 sets of racking.
Ramps can be hired as an add-on to facilitate the easy moving of Jackstacks and trolleys in and out of the cold room.
We can cut out python holes for piping for beer kegs as required.